Desert-Proof PPF: Your Car’s Shield Against Blazing Sun & Sandstorms
Comprehensive vehicle surface protection
¥1380.00¥1100.00
Tired of sand scratches and UV-induced paint fading? Our self-healing PPF blocks 99% of harsh UV rays, resists extreme heat up to 80℃, and heals minor scratches in seconds. Keep your ride looking brand-new—even in the harshest Middle East deserts!#CarProtection #MiddleEastCars #DesertProofPPF.
ENXUN X-215T Product Specification Sheet | |||
Item | Test Method | Value | Unit |
Total Product Thickness | GB/T 6672 | 10±0.3 | mil |
Elongation at Break | ASTM D-882 | ≥300 | % |
Tensile Strength | QC/T 1171-2022 | 20±5 | MPa |
Tear Resistance | QC/T 1171-2022 | ≥50 | KN/m |
UV Blocking Rate | GB/T 2680 | ≥90 | % |
Puncture Resistance | QC/T 1171-2022 | ≥130 | N |
Aging Resistance | QUV (0.5W, 40℃, 340nm, 120min cycle, 18min spray), 3200h | No cracking, blistering or degumming | |
Heat Repair Performance | Scratched 10x with 110g/cm² copper brush; repaired with ~70℃ hot water/hot air | No surface scratches | |
High/Low Temperature Resistance | Alternating 4h at 80℃ (high temp) & -40℃ (low temp), 168h total test | No cracking, blistering or delamination | |
Acid & Alkali Resistance | Immersed 30min in HCl (pH 5-7) & NaOH (pH 7-10) solutions | No abnormalities | |
Abrasion Resistance | QC/T 1172-2022 | Haze change before/after friction ≤1.5% | |
Stone Chip Impact Resistance | SAE-J400 | Grade 10 | |
Product Parameter | Details | ||
Product Substrate | Covestro | ||
Product Adhesives | Ashland | ||
Product Coating | KCC | ||
Product Thickness | 10±0.3 mil | ||
Base Material Origin | Germany | ||
Coating Origin | Japan | ||
Adhesive Origin | USA | ||
Repair Functionality | Heat Repair | ||
Residue-free Adhesion | No Residue | ||
Warranty Years | 3yrs |