Sand-Proof, Sun-Proof, Scratch-Proof—All in One PPF

High-quality multilayer TPU clear film for car surface protection

¥1300.00¥1100.00

ENXUN X-175TY Automotive Film - Technical Specifications
Item	Test Method	Value	Unit
Total Product Thickness	GB/T 6672	8.5±0.3	mil
Elongation at Break	ASTM D-882	≥250	%
Tensile Strength	QC/T 1171-2022	20±5	MPa
Tear Resistance	QC/T 1171-2022	≥50	KN/m
UV Blocking Rate	GB/T 2680	≥90	%
Puncture Resistance	QC/T 1171-2022	≥130	N
Aging Resistance	QUV (0.5W, 40℃, 340nm, 120min cycle, 18min spray) for 3200 hours	No cracking, no blistering, no degumming
Heat Repair Performance	Scraped 10 times with a fine copper brush under load of 110g/cm²; repaired with ~70℃ hot water or hot air	No scratches on surface
High/Low Temperature Resistance	Alternating test:80℃ high temp & -40℃ low temp,4h each cycle for 168 hrs	No cracking,no blistering, no delamination
Acid-Alkali Resistance	Immersed in HCl (pH 5-7) & NaOH (pH 7-10) for 30min	No abnormality
Abrasion Resistance	QC/T 1172-2022	Haze change before & after friction ≤1.5%
Stone Chip Resistance	SAE-J400	Grade 10